Screen sizes and disc formats, Resetting the player – Pioneer BDP-95FD User Manual

Page 47

Advertising
background image

09

47

En

Hints on installation

We want you to enjoy using this product for years to come, so please
bear in mind the following points when choosing a suitable location
for it:

Do...

• Use in a well-ventilated room.

• Place on a solid, flat, level surface, such as a table, shelf or

stereo rack.

Don’t...

• Use in a place exposed to high temperatures or humidity,

including near radiators and other heat-generating appliances.

• Place on a window sill or other place where the player will be

exposed to direct sunlight.

• Use in an excessively dusty or damp environment.

• Place directly on top of an amplifier, or other component in your

stereo system that becomes hot in use.

• Place the player on top of or immediately next to the television or

monitor as you may experience interference.

• Use in a kitchen or other room where the player may be exposed

to smoke or steam.

• Use on a thick rug or carpet, or cover with cloth — this may

prevent proper cooling of the unit.

• Place on an unstable surface, or one that is not large enough to

support all four of the unit’s feet.

Moving the player

If you need to move this unit, first remove the disc, if there’s one
loaded, and close the disc tray. Next, press

STANDBY/ON to

switch the power to standby, checking that the power off indication
in the display goes off. Wait at least 10 seconds. Lastly, disconnect
the power cord.

Never lift or move the unit during playback — discs rotate at a high
speed and may be damaged.

Caution for when the unit is installed in a rack with a
glass door

Do not press the

OPEN/CLOSE button on the remote control to

open the disc table while the glass door is closed. The door will
hamper movement of the disc table, and the disc table could be
damaged.

Screen sizes and disc formats

BD-ROM and DVD-Video discs come in several different screen
aspect ratios, ranging from TV programs, which are generally 4:3, to
CinemaScope widescreen movies, with an aspect ratio of up to
about 7:3.

Televisions, too, come in different aspect ratios; ‘standard’ 4:3 and
‘widescreen’ 16:9.

Widescreen TV users

If you have a widescreen TV, the

TV Aspect Ratio setting (page 41)

of this player should be set to

16:9 (Widescreen).

When you watch discs recorded in 4:3 format, you can use the TV
controls to select how the picture is presented. Your TV may offer
various zoom and stretch options; see the instructions that came
with your TV for details.

Please note that some movie aspect ratios are wider than 16:9, so
even though you have a widescreen TV, these discs will still play in
a ‘letter box’ style with black bars at the top and bottom of the
screen.

Standard TV users

If you have a standard TV, the

TV Aspect Ratio setting (page 41) of

this player should be set to

4:3 (Standard).

Resetting the player

Use this procedure to reset all the player’s settings to the factory
default.

1

Make sure that the player is turned on.

2

Press

to stop playback when a disc is being played back.

3

Press and hold

and press STANDBY/ON.

• Use the control buttons on the front panel.

• The player turns off with all settings reset.

Advertising