Pella Aluminim Clad Sliding Patio Doors With Flush Flange 81CM0100 - Manual

Part Number: 81CM0100 © 2011 Pella Corporation
Installation Instructions for Replacement of Aluminum Sliding Doors in Hard Coat Stucco
Applications in arid climates.
These instructions are designed for typical hard coat stucco exterior applications in arid climates.
The installation must leave the existing aluminum door frame and weep system in place. These
instructions are not to be used with any other construction method and rely on the integrity
of the existing aluminum sliding door and flashing system. Building designs, construction
methods, building materials, and site conditions unique to your project may require an installation
method different from these instructions and additional care. Determining the appropriate
installation method is the responsibility of you, your architect, or construction professional. If you
have questions, please contact your local Pella retailer.
INSTALLATION INSTRUCTIONS - INSTRUCCIONES DE INSTALACION
ALUMINUM-CLAD SLIDING PATIO DOORS WITH
FLUSH FLANGE
Lea las instrucciones en español en el reverso
REMEMBER TO USE APPROPRIATE PERSONAL PROTECTIVE EQUIPMENT.
Always read the Pella ® Limited Warranty before purchasing or installing Pella
products. By installing this product, you are acknowledging that this Limited
Warranty is part of the terms of the sale. Failure to comply with all Pella installation and
maintenance instructions may void your Pella product warranty.
See Limited Warranty for complete details at http://warranty.pella.com.
Sill Pan
Existing Aluminum
Door Frame
Wood
Blocking
Flush
Flange
Optional Sill Nose