POLAR CS600 - Manual (Page 33)

Reminder time : Enter the time for the reminder.
Alarm : Set alarm to sound on time, or 10 min / 30 min / 1 hour prior to the task.
Sound : Select alarm sound Silent / Beep / Normal.
Repeat : Select reminder to repeat Once / Hourly / Daily / Weekly / Monthly / Yearly.
Exercise : Select an exercise to link to the reminder. When the reminder goes off, the cycling computer
will present this exercise as default. Select NONE if you do not want to link the reminder to an
exercise session.
Rename : To rename the reminder, select letters with UP or DOWN, and accept with OK.
You can program seven reminders in the cycling computer.
To see active reminders and modify them:
Select Settings > Watch > Reminders
Select a reminder to view, edit, rename or delete.
Event
To set an event countdown in the cycling computer
Select Settings > Watch > Event
Event day : dd=day, mm=month.
Rename : To rename the event, select letters with UP or DOWN, and accept with OK.
To modify the event countdown
Select Settings > Watch > Event
You can view the event countdown, set a new date, rename or delete it.
In time mode, hide or view the event countdown again by pressing and holding UP.
Alarm
Set an alarm on your cycling computer
Select Settings > Watch > Alarm > Off / Once / Mon-Fri / Daily
You can set the alarm to go off either once ( Once ), everyday between Monday and Friday ( Mon-Fri ), daily
( Daily ) or you can set if Off . The alarm sounds in all modes except in exercise mode, and will do so for a
minute unless you press STOP. The watch alarm also functions in sleep mode and even if you have
turned the sound off in the
General settings.
To snooze the alarm an extra 10 minutes, press UP or DOWN buttons or OK: Snooze is displayed and
the snooze time starts counting. To exit the snooze alarm, press STOP.
If a battery symbol appears in the display, the alarm cannot be activated.
Time
Set time 1 in the cycling computer
Select Settings > Watch > Time 1 > 24h / 12h
Set time 2 in the cycling computer
Select Settings > Watch > Time 2
Set the desired time difference between time 1 and time 2 in hours with UP/ DOWN buttons.
Time zone
Switch between time zones
Select Settings > Watch > Time zone > Time 1 / Time 2
Polar CS600 User Manual 33