Peavey PV 6 - Manual (Page 10)

10
P PV V ® 6 6 C Co om mp pa ac ctt C Co on ns so olle e
S SP PE EC CIIFFIIC CA AT TIIO ON NS S
Function
Microphone (150
ohms)
Line (10k ohms)
Stereo Line Input
Aux Returns
Tape
Input Z
(ohms min)
2.2k
10k
10k
10k
10k
Input Gain
Setting
Max Gain
(60 dB)
Min Gain
(9 dB)
Max Gain
(40 dB)
Min Gain
(-10 dB)
Max Gain
(30 dB)
N/A
(0 dB)
N/A
(10 dB)
Nominal*
-56 dBu
-5 dBu
-36 dBu
+14 dBu
+4 dBu
+4 dBu
-10 dBV
Max
-38 dBu
+13 dBu
-18 dBu
+32 dBu
+22 dBu
+22 dBu
+12 dBu
Bal/Unbal
Bal
Bal
Unbal
Unbal
Unbal
Connector
XLR Pin 1 Gnd Pin
2 (+)‚ Pin 3 (-1)
1 ⁄
4"
TRS; Tip (+)‚
Ring (-)‚ Sleeve
Ground
1 ⁄
4"
TRS; Tip (+)‚
Sleeve Ground
1 ⁄
4"
TRS; Tip (+)‚
Sleeve Ground
RCA Phone
Input Levels
Min**
-83 dBu
-31 dBu
-63 dBu
-12 dBu
-26 dBu
-17 dBu
-17 dBu
Function
Main Left/Right
Effects Sends
Headphone
Tape
Min Load Z
(ohms)
600
600
8
2.2 k
Nominal
+4 dBu
+4 dBu
+4 dBu (no load)
+4 dBu
Max
+22 dBu
+22 dBu
+22 dBu
+22 dBu
Bal/Unbal
Bal
Bal
Unbal
Unbal
Connector
1 ⁄
4"
TRS: Tip (+); Ring (-); Sleeve
Ground
1 ⁄
4"
TRS; Tip (+)‚ Sleeve Ground
1 ⁄
4"
TRS; Tip Left‚ Ring Right‚ Sleeve
Ground
RCA Phone
Output Level
0 dBu = 0.775 V (RMS)
** Min Input Level (sensitivity) is the smallest signal that will produce nominal output (+4 dBu) with channel and master faders set for
maximum gain.
* Nominal settings are defined as all controls set at 0 dB (or 50% rotation for rotary pots) except the gain adjustment pot which is as
specified.
0 dBu = 0.775 V (RMS)
Gain
Mic Input Gain Adjustment Range: 10 dB to 60 dB
Mic Input to Left/Right Balance Output 87 dB (max gain)
Line Input Gain Adjustment Range: -10 dB to 40 dB
Line Input to Left/Right Balance Output 67 dB (max gain)
Stereo Line Input Gain Adjustment Range: 10 dB
Stereo Line Input to Left/Right Output 28 dB (max gain)
Aux Return to Left/Right Balance Output 21 dB (max gain)
Inputs
Outputs