Psion Teklogix Win CE 4.2 - Manual (Page 31)

Psion Teklogix NETBOOK PRO Win CE 4.2 User Manual 13
Chapter 2: Getting Started
Finding And Using The Stylus
To disable the power-on password:
1. Select Start, Control Panel. The Control Panel appears.
2. Double-click on the Password icon. A dialog appears, requesting the
existing password.
3. Enter the existing password. The Password Properties dialog appears.
4. Deselect the At Power On checkbox.
5. Press the OK button.
The existing password will still be active. Any changes to the Owner or Password
settings will still require this password for access.
To completely disable the password, clear the two password-entry fields and press
the OK button. The password will not be then needed for access to the Owner or
Password settings.
2.4 Finding And Using The Stylus
The stylus is located in the NETBOOK PRO, in a holder at the right.
Figure 2.2 Location Of The Stylus
To remove the stylus, push the square button next to it. The stylus pops out. To
replace the stylus, push it back in. You can use your fingers to tap on the screen,
though it is best to use the stylus to avoid fingerprints or smudges on the screen.
Stylus
Stylus Eject Button