Patton electronic MODEL 2126 - Manual (Page 6)

The following briefly explains the functions of the options listed on the
previous page:
• File Servers to be Serviced This option allows the user to
specify which File Servers the Print
Server will search for its queues etc.
• Notify List for Printer This option may be used to specify
which users will be notified of Printer
Problems (paper jams etc.) if and
when they occur.
• Printer Configuration This option is used to configure
printer connected to the PeNetTM
Print Server. The printer must be
defined as Parallel LPT1 (parallel
port 1).
• Queues Serviced by Printer It is possible to specify which
queues the connected printer will
service. Up to 16 queues may be
specified for each print server.
If necessary, create a new queue by selecting Print Queue
Information from the Available Options menu, and use INSERT to
create new print queues to be served by PeNetTM Print Server.
A test file can be printed while in PCONSOLE using the Current Job
Entries option in the Print Queue Information menu. Press INSERT and
then ENTER to obtain a list of files to print.
3.5 UCONNECT Commands
Once the UCONNECT utility has been copied to the hard drive,
type UCONNECT at the DOS prompt and press [ENTER] to execute the
program.
UCONNECT is a menu driven program. To work within the menus,
use the arrow keys to scroll up and down between menu items. The
[esc] key is a toggle switch used to select and deselect menu items to
be edited. The [ENTER] key is used to update the file and move to
another menu screen. Some screens have slightly different commands.
These are noted on the screen itself.
9
4.0 NOVELL OPERATION
This section tells how to use the Print Server with a Novell network.
Functions described include locating the Print Server on the network,
configuration, testing, printing, and FLASH EPROM upgrading. For
instructions on use of the Print Server within a TCP/IP network that is
not Novell based, please refer to Section 5.0.
4.1 Locating the Print Server on the Network
The Print Server has a unique NIC Address that has been provided
by Patton Electronics with the approval of the ISO council (this NIC
Address has been marked on a label on the underside of the unit).
Before the Print Server can be configured, operated, tested or
upgraded, it must be located and recognized by the network. Using
the UCONNECT utility, follow these steps to locate the print server:
1) Having completed the instructions in Section 3.0, you should see the
Main Menu screen.
2) Select “Configuration” and press [ENTER]. This will take you to the
Specify Print Server Address screen (following page).
10
Note: the appearance of many of the screens will vary based
upon the configuration of your particular network. The
network component names show are examples only.