Panasonic BB-HCM371A - Manual (Page 90)

Operating Instructions
90
2.19 Stop the SD Memory Recording
After you stop the SD memory recording, remove the SD memory card.
Notes
• You can confirm the SD memory capacity on the Status page (see page
118).
• If the camera is restarted (see page 119), the SD memory recording starts
again.
• If you remove the SD memory card and insert it again, the SD memory
recording starts again (see page 40 of the Installation/Troubleshooting).
1.
Click [Buffer/Transfer] on the Setup page.
2.
Click [SD video recording stop].
3. Click [OK] on the confirmation window.
• The SD memory recording is stopped.
4. Click [Go to Image Buffer/Transfer page].
• The Image Buffer/Transfer page is displayed.
Note
Ensure that recording has been stopped, before removing the SD memory
card. If the SD memory card is removed while recording, the image file will
most likely become unreadable. In this case, format the SD memory card
again. (Files will be deleted.)