Using sound effects, Adjusting the amount of bass: subwoofer level, Enhancing the stereo sound: super surround – Panasonic sc-pt150 User Manual

Page 29: Changing the sound quality: equalizer mode (eq), Enhancing the stereo sound: dolby pro logic ii

Advertising
background image

OTHER OPERA

TIONS

ENGLISH

29

RQT8043

RQTX0029

Using sound effects

Note

• The following sound effects may not be available

or have no effect depending on the type of source.

• You may experience a reduction in sound quality

when these sound effects are used with some
sources. If this occurs, turn the sound effects off.

Adjusting the amount of bass:
Subwoofer level

You can adjust the amount of bass. The unit
automatically selects the most suitable setting
according to the type of playback source.

SUB W 2 (factory preset) SUB W 3

SUB W 1 SUB W 4

When AV or AUX source is selected

SUB W 1 (factory preset) SUB W 2

SUB W 4 SUB W 3

• To check the current setting, press [SW.LEVEL].

The setting you make is retained, and recalled
every time you play the same type of source.

Enhancing the sound from the center
speaker: Center Focus

This applies to discs where the dialogue is
recorded in the center channel.
You can make the sound of the center speaker
seem like it is coming from within the television.

C FOCUS ON

C FOCUS OFF

• This also works when Dolby Pro Logic

II is

turned on.

Enhancing the stereo sound:
Super Surround

MOVIE : Use this mode when playing

movie software.

MUSIC : Adds surround effects to

stereo sources.

OFF

: Cancel.

• Super Surround and EQ can be turned on

simultaneously.

• This function is only available for FM, AV and

AUX mode.

Changing the sound quality:
Equalizer Mode (EQ)

SOFT

*

: For background music.

HEAVY : Adds punch to rock.
CLEAR : Clarifi es higher sounds.
FLAT : Cancel (no effect is added)

(factory preset).

• To check the current setting, press [EQ].
• You can adjust the volume of the surround

speakers to get the best surround effect
(

\ page 30, Adjusting the volume of each

speaker: Speaker level adjustments).

*

Factory preset when AV or AUX source is

selected.

Enhancing the stereo sound:
Dolby Pro Logic

II

Dolby Pro Logic

II is an advanced decoder that

derives 5-channel surround (Left and Right
Front, Center, Left and Right Surround) from
stereo sound sources, whether or not it has been
specifi cally Dolby Surround encoded.

MOVIE : Movie software, recorded in

Dolby Surround.

MUSIC : Stereo sources.
OFF

: Cancel.

• This function is only available for DVD/CD and

USB mode.

• “

ŸPL II” lights when there is effect.

RQTX0029-B10.indd 29

RQTX0029-B10.indd 29

1/21/07 4:45:53 PM

1/21/07 4:45:53 PM

Advertising