Panasonic DMC-FX38 - Manual (Page 83)

83
VQT1S07
Advanced (Playback)
Press [‚] to return to the menu screen.
• Press [MENU/SET] to close the menu.
Note
• After converting the aspect ratio, the picture size may become larger than that of the original
picture.
• You may not be able to convert pictures taken on other equipment.
This mode allows you to automatically display pictures vertically if they were recorded
holding the camera vertically or rotate pictures manually in 90o steps.
Select [ROTATE] on the [PLAYBACK] mode menu. (P18)
• The [ROTATE] function is disabled when [ROTATE DISP.] is set to [OFF].
Press 2/1 to select the picture and then press
[MENU/SET].
• Motion pictures and protected pictures cannot be rotated.
Press 3/4 to select the direction to rotate the
picture and then press [MENU/SET].
Press [‚] to return to the menu screen.
• Press [MENU/SET] to close the menu.
Press 2/1 to determine the horizontal position,
and press [MENU/SET] to set.
• Use 3/4 to set the frame position for pictures rotated vertically.
Press 3 to select [YES] and then press [MENU/
SET].
N [ROTATE]/M [ROTATE DISP.]
Rotate (The picture is rotated manually)
: The picture rotates clockwise in steps of 90o.
: The picture rotates counter-clockwise in steps of 90o.
4
5
6
1
2
3
4
DMC-FX38GN-VQT1S07_eng.book 83 ページ ２００８年７月７日 月曜日 午後８時４２分