Panasonic KX-MB2060 - Manual (Page 81)

Feature/Code Selection
Setting the recording paper
size in the manual input tray
MBNM3NM8NM1N M1N “LETTER” (default): Letter-size paper
M2N “A4”: A4-size paper
M3N “LEGAL”: Legal-size paper
M4N “B5(ISO)”: B5(ISO)-size paper
M5N “B5(JIS)”: B5(JIS)-size paper
M6N “16K”: 16K-size paper
M7N “8.5X13”
M8N “8.5X13.4”
Note:
R When you set feature #147 to “MILLIMETERS”, the numbers are displayed
in millimeters.
Setting the recording paper
type for paper input tray
MBNM3NM8NM3N M1N “PLAIN PAPER” (default): 75 g/m 2 to 90 g/m 2 (20 lb to 24 lb) paper.
M2N “THIN PAPER”: 64 g/m 2 to 75 g/m 2 (17 lb to 20 lb) paper.
Note:
R This setting will be deactivated when printing from a computer. To set the
recording paper type for printing, see page 35.
Setting the recording paper
type for manual input tray
MBNM3NM8NM4N M1N “PLAIN PAPER” (default): 75 g/m 2 to 90 g/m 2 (20 lb to 24 lb) paper.
M2N “THIN PAPER”: 64 g/m 2 to 75 g/m 2 (17 lb to 20 lb) paper.
Note:
R This setting will be deactivated when printing from a computer. To set the
recording paper type for printing, see page 35.
Changing the receiving mode
in the auto answer setting
MBNM4NM0NM0N M1N “TAM/FAX” (default): Telephone Answering Machine/Fax mode (page 62)
M2N “FAX ONLY”: Fax only mode (page 63)
Setting the waiting time for
the power save mode
MBNM4NM0NM3N To set the length of time before the base unit enters power save mode.
M1N “5min” (default): 5 minutes
M2N “15min”: 15 minutes
M3N “30min”: 30 minutes
M4N “1h”: 1 hour
Note:
R When in power save mode, the unit needs to preheat the fuser unit before
it can begin printing.
Holding the previous contrast
setting
MBNM4NM6NM2N M0N “DISABLED” (default): Deactivates this feature.
M1N “ENABLED”: The unit will hold the previous setting.
Note:
R The previous setting will be held individually for copying.
R The previous setting will be held individually for sending faxes.
Setting the default operation
mode
MBNM4NM6NM3N To select the default operation mode when the selected time of the mode timer
(feature #464) passes.
M1N “COPY” (default): Copy mode is selected as default.
M2N “FAX”: Fax mode is selected as default.
Note:
R You cannot select the scan mode using this feature.
Setting the default operation
mode timer
MBNM4NM6NM4N To set the timer before returning to the default operation mode (feature #463).
M0N “OFF”: Deactivates this feature.
M1N “30s”: 30 seconds
M2N “1min” (default): 1 minute
M3N “2min”: 2 minutes
M4N “5min”: 5 minutes
81
11. Programmable Features