Preparation, Connections and setup, 1 connections – Panasonic KX-MB2060 User Manual

Page 21: 1 base unit, 2 charger unit (kx-mb2060 optional), Connections

Advertising
background image

2.1 Connections

2.1.1 Base unit

Caution:
R When you operate this product, the power outlet

should be near the product and easily accessible.

Important:
R See page 18 to connect the handset unit.

C

D

B

A

E

F

Power cord
R Connect to a power outlet

(120 V, 60 Hz).

Telephone line cord
R Connect to a single telephone line jack (RJ11C).
To the Internet

Network router/Network hub (not supplied)
R Also connect networked computers.
LAN cable (not supplied)
R To assure continued emission limit compliance,

use only shielded LAN cable (Category 5 (Cat-5)
Ethernet cable).

IMPORTANT NOTICE FOR THE USB
CONNECTION
R DO NOT CONNECT THE UNIT TO A

COMPUTER WITH THE USB CABLE UNTIL
PROMPTED TO DO SO DURING THE SETUP
OF MULTI-FUNCTION STATION (page 31).

Note:
R Do not place any objects within 10 cm (4 inches) of

the right, left and back sides of the base unit.

R If any other device is connected to the same

telephone line, this unit may disturb the network
condition of the device.

Using surge protectors
R The warranty does not cover damage due to power

line surges or lightning. For additional protection, we
recommend using a surge protector (F).

If the unit shares a single telephone line with a DSL
service
Fax transmission/reception may be disturbed, noise
interference may be heard during telephone
conversations, or Caller ID (page 54) may not function
properly. Please attach a DSL filter (G) to the telephone
line cord of the unit to prevent this. A DSL filter may be
provided by your DSL service provider.

G

Using network router/network hub
R We recommend using network routers/network hubs

(D) under secure network environments. Consult
your network administrator for firewall settings, etc.

R The warranty does not cover damage due to security

problems or any inconveniences relating to it.

2.1.2 Charger unit (KX-MB2060 optional)

AC adaptor
R Connect to a power outlet (120 V, 60 Hz).
Hooks
R Fasten the AC adaptor cord to prevent it from

being disconnected.

For assistance, please visit http://www.panasonic.com/help

21

2. . Preparation

2. Preparation

Advertising
This manual is related to the following products: