Philips DECT 221 - Manual (Page 20)

www.philips.com/faqs/dect
18
www.philips.com/faqs/dect
19
8 Advanced features
Dial mode *
Your phone is set to tone dialling. You can switch to pulse dialling if necessary.
1. Press the MENU key.
2. Select SETTINGS and press the OK key.
3. Select DIALMODE and press the OK key. The current setting is displayed.
4. Select TONE or PULSE.
5. Press the OK key to confirm.
Recall duration *
Your phone comes with 2 factory programmed recall durations. Check with your local service provider if you are not
sure which duration to use.
1. Press the MENU key.
2. Select SETTINGS and press the OK key.
3. Select RECALL and press the OK key. The current duration is displayed.
4. Select RECALL 1 or RECALL 2.
5. Press the OK key to confirm.
Note: Your handset must have a link with the base unit in order to use any advanced features mentioned in this
section.
Temporary tone dialling in pulse dial mode
If the dialling mode is set to pulse, after taking the line you can press and hold the
STAR key to set temporary
tone dialling. d will be displayed on the screen. All the following digits will be dialled as tones until you hang up.
ADVANCED FEATURES
*Country dependent
Note: This setting is useful when using operator services. The use of some services accessed with R key +1, R
key+2, Key+3 (call waiting, call forward...) will depend on the recall setting.