Panasonic PT-AE100E - Manual (Page 17)

E NGLISH -33
Basic
Operation
32-E NGLISH
Changing the display language
Using the index window function
This function lets you store a picture which is being projected into memory,
so that you can display a still picture and a moving picture on the screen.
# Press the F (function) button.
NOTE:
B The aspect ratio of the screen changes and the
image is vertically elongated in comparison to
a normal image.
$ Use the F and G buttons to select a screen
size.
The screen size can be chosen from 3 options.
Indicates the language which is
currently set
# Select LANGUAGE from the MAIN MENU screen and then press the
ENTER button.
$ Use the FG buttons to select a language and then press the ENTER
button.
L A N G U A G E E N G L I S H
E N G L I S H
D E U T S C H
F R A N Ç A I S
E S P A Ñ O L
I T A L I A N O
S E L C T E N T E R E S C
Still
picture
Moving
picture
Still
picture
Moving
picture
Still
picture
Moving
picture
Still
picture
Moving
picture
Still
picture
Moving
picture
Moving
picture
Still
picture
Using the shutter function
The shutter function can be used to momentarily turn off the picture and
sound from the projector when the projector is not being used for short
periods of time, such as during breaks in meetings or when carrying out
preparation. The projector uses less power in shutter mode than it does in
normal projection mode.
# Select SHUTTER from the MAIN MENU screen and then press the
ENTER button.
$ Press any button on either the projector or remote control unit to
return to normal operating mode.
% Use the I I and H H buttons to switch between the still picture screen
(left) and moving picture screen (right).
& Press the ENTER button to store the picture in memory.
NOTE:
B When the screen size is changed, the picture’s aspect ratio will also
change. Make sure that you fully understand the notes on S2 and S1
signals which are given on page 30 before using the index window
function.
B When steps $ and % are carried out, the memory will be reset and a new
picture will be stored in memory.
Select INDEX from the FUNCTION item in the OPTION menu to use this
function. (Refer to page 38.)
Muting the sound
The sound can be muted for temporary interruptions such as telephone calls.
Press the MUTE button once to turn off sound, and press MUTE again to
regain sound.
NOTE:
B Turning off the power will cancel adjustments such as volume level set
with the VOLUME +/- buttons.