PYLE Audio PLDVD-150 - Manual (Page 11)

11
REMOTE CONTROL
Preparing the Remote Control
Inserting the Batteries
1. Open the battery compartment cover.
2. Insert the new batteries. Make sure
that the positive and negative
terminals of the batteries are oriented
indicated.
3. Close the cover
Battery: Two AAA size battery.
Using the Remote Control
Face the remote control towards the
player front face IR mark (remote control
signal reciver).
Operation angle: About
± 30 degree in
each the direction of the front of the IR
mark.
To prevent damage to the unit, be sure
to follow the connection diagram
(page 9).
Loading a DVD/VCD/CD Disc
1. Turn the ignition on the the accessory
position.
2. Press the POWER button (1).
3. Press the OPEN button (2), the front
panel will fold down slowly.
4. Insert the disc with printed side facing
up.
5. The player starts playback
automatically.
Ejecting a Disc
• Press the OPEN button (2).
• Let the panel fully fold down, then
press (8) to eject.
• Remove the disc and close back the
front panel.
(1) Power Button
(2) Open Button
(3) Remote Sensor
(4) VFD Display
(5) Disc Slot
(6) Flash LED
(7) Reset Button
(8) Eject Button
5 7 6 8
3 4 2 1