Access to screens and systems – PYLE Audio SOUNDPOINT IP SIP 3.2.1 User Manual
Page 78
User Guide for the SoundPoint IP 32x/33x Desktop Phone
5 - 4
Access to Screens and Systems
Symptom
Problem
Corrective Action
There is no response when you
press a feature key.
The SoundPoint IP 32x/33x
phone is not in an active state.
Do one of the following steps:
•
Press the keys more slowly.
•
Check with your system administrator
to see if the key has been mapped to
a different function or is disabled.
•
Place a call to the phone to check that
inbound call display and ringing is
normal. If successful, try to press
feature keys within the call to access
the Menu, for example.
•
To confirm that the line is active, press
the Menu key, and then select Status
> Lines > Line Information. From the
Line Information page, verify that your
phone line is registered.
•
To attempt re-registration to the call
server, reboot your phone. Contact
your system administrator.
The display shows “Network Link
is Down”.
The LAN cable is not properly
connected.
Do one of the following steps:
•
Check termination at the switch or hub
(furthest end of the cable from the
phone).
•
Check that the switch or hub is
operational (flashing link/status lights)
or contact your system administrator.
•
Check if the LAN port is active or
inactive. Press the menu key, and
then select Status > Network >
Ethernet. From the Ethernet page,
scroll to the LAN port field and verify
that it is active.
•
To attempt re-registration to the call
server, reboot your phone. Contact
your system administrator.