Pass Labs XA100 - Manual (Page 9)

9 XA100 Owner’s Manual
All figures obtained after 1 hour warm-up, with regulated 120 VAC
power line. See manual notes about AC power line regulation.
Gain 26 dB
Freq. Response -3 dB at 1.5 Hz, -3 dB at 100 kHz
Power Output 100 watts max @ 1% THD,
1 kHz, 8 ohms
Maximum Output Voltage plus, minus approx. 40 volts
Maximum Output Current plus, minus approx. 5 amps
Input Impedance 22 kohm balanced
11 kohm unbalanced
Damping factor 30 ref @ 8 ohms nominal
Slew rate plus, minus 50 V/uS
Output Noise 300 uV unweighted 20-20 kHz
Balanced CMRR approx. -60 dB @ 1 kHz
DC offset < 100 mv
Power Consumption approx. 300 watts
Temperature 25 degrees C. above ambient at idle
Dimensions 19 “ W x 9” H x 22” D
Shipping Weight 68 lbs.
For more information please contact:
Pass Laboratories Inc.
P.O. Box 219,
24449 Foresthill Rd.,
Foresthill, CA 95631
Tel: 530.367.3690
Fax: 530.369.2193
www.passlabs.com
© 2006, Pass Laboratories Inc.
XA100 Specifications
“Pass”, “pass”, “Pass Labs”, “Pass Laboratories”, Supersymmetery”,
“Aleph”, and “Zen” and are all registered trademarks of Pass
Laboratories, Inc., and all rights thereto are protected by law.