Panasonic UF-790 - Manual (Page 37)

Customizing Your Machine
37
Fax Parameter Table
Pr
ogr
a
mming
Y
our
M
a
c
h
ine
18 OPERATOR CALL
TIMER
*1 20 sec. Selecting the length of time that your machine signals
(rings) for an incoming voice call in Fax/Tel Auto Switching
mode. (See page 64)
2 30 sec.
3 40 sec.
4 50 sec.
19 OGM LENGTH
(TAM I/F)
1 1 sec. Setting for the OGM length of your TAM from 1 to 60
seconds. The machine will not start to detect SILENCE
until the time setting has lapsed.
(Default = 20 sec.)
--- ---
60 60 sec.
20 SILENT DETECTION
(TAM I/F)
1 Invalid Selecting the Silent Detection Mode.
*2 Valid
22 SUBSTITUTE RCV 1 Invalid Selecting whether the machine receives to memory when
recording paper runs out, toner runs out or recording paper
is jammed.
*2 Valid
23 RECORDING PAPER
SIZE
1 A4 Setting the recording paper size installed in your machine.
*2 Letter
3 Legal
24 PRINT REDUCTION 1 Fixed Selecting print reduction mode.
Fixed: Reduce received document according to setting of
Parameter No. 25.
Auto : Reduce received document according to the length
of received documents.
*2 Auto
25 REDUCTION RATIO 70 70% Selecting fixed print reduction ratio from 70% to 100%.
This parameter functions only when fixed print reduction is
selected on Fax Parameter No. 24.
---- ----
*100 100%
26 POLLING PASSWORD (----) Setting a 4-digit password for secured polling.
27 POLLED FILE SAVE *1 Invalid Selecting whether the machine retains the polled
document in memory even after the document is polled
once.
2 Valid
28 STAMP AT MEM. XMT 1 Invalid Selecting whether the machine stamps the original
documents when storing the documents into memory.
(Depending on the Stamp setting on the Control Panel)
*2 Valid
31 INCOMPLETE FILE
SAVE
*1 Invalid Selecting whether the machine retains the document in
memory if the document is not successfully transmitted.
2 Valid
32 COPY REDUCTION 1 Manual Selecting whether the machine performs the copy
reduction ratio automatically or manually.
Manual : The machine will prompt you for the Zoom ratio
(100% to 70%) when making copies.
Auto : The machine will automatically determine the
reduction ratio according to the length of the
original document.
*2 Auto
No. Parameter
Setting
Number
Setting Comments
Continued on the next page...