Reset mcu, Reset mcu -17 – Polycom DOC2232A User Manual
Page 111
Chapter 8 - MGC-25 Management Tools
8-17
Reset MCU
The Reset MCU function is used to reset the MCU when there are substantial
changes to the MCU hardware, or when there are problems with the MCU. If
a reset is performed while running On Going Conferences, at the end of the
MCU Startup, these conferences are automatically restored with all the
defined participants in “Standby” state, and will be reconnected to the
conference.
When the MCU is started, only the list of near future reservations is loaded to
the MCU memory, while the information of all other reservations are kept on
the MCU’s hard disks, resulting in faster loading time.
To reset the MCU:
•
Right-click the MCU icon, and then click Reset MCU.
When the MCU is resetting, the MCU icon changes accordingly.