Phase Technology Motion Sensor FP Series - Manual (Page 3)

SD-25 Audio Repeater
Gilderfluke & Company Burbank, califorina
Power
9-24 VDC
Line out
Left Line out
right
Speakers
Left Right
Power
9-24 vdc
Running
status
Inputs
A B
Black Spk
Red Spk
Green Spk
White spk
Brown
White Brown
Cat V Pair
Orange
White Orange
Cat V Pair
Jumper wire
Pin 5 to 10
Blue
Cat V (Signal)
12 VDC
Power
supply
Install Instructions For:
SoundTube/Gilderfluke SD-25
FP6030-M FP6020-M Wiring diagram 1.435.647.9555 | 800.647.TUBE | www.soundtube.com
FP Series FP Series
Notes
1- 12 VDC is the maximum power
input from the power supply if using
soundtube motion sensor
2- If more volume is needed the SD-25
can be bridged and run in mono
mode. Internal jumpers need to be
set for this mode. Please see Sd-25
configuration & installation
instructions.
3- For operating and playback modes
please see SD-25 installation sheet.