Philips E-GSM 1800 - Manual (Page 12)

6 Calling
The Notepad allows you to note down a number. You
can then store it in the phonebook, call it, or send a
message to this number.
Quickcall
To access the Quickcall feature, press + when in idle
mode. It allows you to set your four most frequently
dialled numbers. You can then quickly call one of
them by selecting the corresponding icon or picture
on the screen.
This feature is also available from the main menu, in
Settings
> Shortcuts > QuickCall.
Setting a Quickcall contact
1. In idle mode, press +to access the Quickcall
screen. Select a thumbnail to configure and press
, or L Set .
2. Select a name in the contacts list, and press OK
again to access the Picture album and select a
picture. Proceed the same way for each
thumbnail.
Calling a Quickcall contact
To make a call, press +when in idle mode, then
select the thumbnail of your choice and press (.
To reconfigure a thumbnail, select it and press , to
Replace the name and/or picture.
If a picture is already associated with a contact, it is
displayed in the
Quickcall screen. Changing the
picture in one of the menus will also update it in the
other.
Handling multiple calls
The ability to handle two or more calls at one time
and to make conference calls is dependent on your
operator and/or subscription.
Making a second call
You can make a second call during an active call or
with a call on hold. While on the phone, dial a
number (or select a contact in the phonebook) and
press
(. The first call is put on hold (the number is
displayed on the bottom of the screen) and the second
number is dialled. You can then press
OK to access the
options among which are:
•
Switch calls to toggle between calls (you can also
press <or>to switch calls).
• Transfer to connect the two calls. You are dis-
connected when the transfer is completed.
• Conference to introduce the caller into a confer-
ence call.
Philips362-V2_GB_4311 255 63391.book Page 6 Mardi, 5. juillet 2005 2:42 14