Patton electronic 2620 - Manual (Page 2)

2 IPLink 2603 & 2620 Quick Start Guide
1.0 Power up the router
Your router comes with one of the following power supply options:
• External AC adaptor with included power cord
• Internal AC power supply
• Internal DC power supply—no power accessories are included
1.1 Models with external AC adaptor
1. Connect female plug of the AC power cord to the AC adaptor provided.
• This device contains no user serviceable parts. The equipment shall be
returned to Patton Electronics for repairs, or repaired by qualified
service personnel.
• Mains Voltage: Do not open the case the when the power cord is
attached. Line voltages are present within the power supply when
the power cords are connected. The mains outlet that is utilized to
power the devise shall be within 10 feet (3 meters) of the device,
shall be easily accessible, and protected by a circuit breaker.
• For AC powered units, ensure that the power cable used meets all
applicable standards for the country in which it is to be installed, and
that it is connected to a wall outlet which has earth ground.
• For units with an external power adapter, the adapter shall be a
listed Limited Power Source.
• Hazardous network voltages are present in WAN ports regardless of
whether power to the unit is ON or OFF. To avoid electric shock, use
caution when near WAN ports. When detaching the cables, detach the
end away from the device first.
• Do not work on the system or connect or disconnect cables during
periods of lightning activity.
The interconnecting cables shall be acceptable for external use and shall be rated for
the proper application with respect to voltage, current, anticipated temperature, flam-
mability, and mechanical serviceability.
Use only a 12V certified Limited Power Source external power adaptor marked LPS.
WARNING
CAUTION
CAUTION