Panasonic CQ-C3401 - Manual (Page 5)

OPEN
DISC
SCROLL
PWR
MUTE
RANDOM SCAN REPEAT CLOCK
FO
LD ER
VO
LU
M
E
P U S H SE
L
T U N E /T R AC
K
CQ-C3401W
2 1 3
SRC
SQ 4 5 6 DISP
BAND
APM
2 1 3
SRC
4 5 6 DISP
BAND
APM
10 11
9
E
N
G
L
I
S
H
10
E
N
G
L
I
S
H
CQ-C3401W CQ-C3401W
q
Radio Mode
Press [SRC] to select the radio mode.
w
Band
Press [BAND].
e
Tuning
[[]: Higher frequency
[]]: Lower frequency
Press and hold [[] or []] for more than 0.5
seconds, then release it. Seeking will start.
Display Change
Press [DISP] to change the display as follows.
Radio
[BAND]
(APM: Auto Preset Memory)
[DISP] (Display) Preset Buttons [1] to [6]
(Preset station)
[]] [[] (TUNE)
Band Frequency Preset number
F requency
Clock time
Auto Preset Memory (APM)
With this operation, stations with good receiving condi-
tions can be automatically stored in the preset memory.
q Select a band. (
a Previous page)
w Press and hold [BAND] (APM) for more than 2 sec-
onds.
6 stations with first to 6th highest in signal strength will
be preset to each band.
Once set, the preset stations are sequentially scanned
for 5 seconds each. (scanning)
Note:
¡ To stop scanning, press one of the buttons from [1] to
[6].
Manual Preset Memory
With this operation, a station can be manually stored in the
preset memory.
q Select a band and frequency. (
a Previous page)
w Press and hold one of the preset buttons from [1] to [6]
until the display blinks once.
Preset number
Station Preset
Up to 6 stations can be stored in each of the FM1, FM2, FM3 and AM band selections.
Note:
¡ New stations overwrite existing saved stations after these procedures.
Warning
¡To ensure safety, never attempt to preset stations while you are driving.
Preset Station Calling
q Select a band. ( a Previous page)
w Press one of the preset buttons from [1] to [6].
[SRC: Source] (Stereo) indicator