Porter-Cable 310 - Manual (Page 5)

5
19. Stay Alert. Watch what you are doing. Use common sense. Do not
operate tool when you are tired.
20. Check Damaged Parts. Before further use of the tool, a guard or other
part that is damaged should be carefully checked to determine that it will
operate properly and perform its intended function. Check for alignment of
moving parts, binding of moving parts, breakage of parts, mounting, and any
other conditions that may affect its operation. A guard or other part that is
damaged should be properly repaired or replaced by an authorized service
center unless otherwise indicated elsewhere in this instruction manual. Have
defective switches replaced by authorized service center. Do not use tool if
switch does not turn it on and off.
SAVE THESE INSTRUCTIONS
1. Hold tool by insulated gripping surfaces when performing an
operation where the cutting tools may contact hidden wiring or its own
cord. Contact with a “live” wire will make exposed metal parts of the tool
“live” and shock the operator.
2.
Use recommended accessories only. The use of improper accessories
may cause risk of personal injury.
3.
Use certified safety equipment. Eye protection equipment should
comply with ANSI Z87.1 standards, hearing equipment should comply with
ANSI S3.19 standards, and dust mask protection should comply with
MSHA/NIOSH certified respirator standards.
4.
Never adjust depth of cut while motor is running. A slip at this time
may cause personal injury, or damage to cutter or workpiece.
5.
Be sure cord set is free and will not “hang up” during trimming
operations.
6.
Keep hands clear of cutter when motor is running to prevent
personal injury.
7.
Maintain firm grip on trimmer when starting motor to resist starting
torque.
8.
Stay alert and keep cutter clear of all foreign objects while motor is
running.
9.
Be sure motor has completely stopped before setting machine
down between operations.
10. Never touch bit immediately after use, as it may be extremely hot.
11. Do not use Laminate Trimmer motor without the Laminate Trimmer
Base installed. Loss of control could result, causing personal injury, or
damage to work.
12. Some wood contains preservatives which can be toxic. Take extra
care to prevent inhalation and skin contact when working with these
materials. Request, and follow, any safety information available from your
material supplier.
ADDITIONAL SPECIFIC SAFETY RULES
Technical Service Manager
Porter-Cable Corporation
4825 Highway 45 North
Jackson, TN 38305
There are certain applications for which this tool was
designed. Porter-Cable strongly recommends that this tool NOT be modified
and/or used for any application other than for which it was designed. If you have
any questions relative to its application DO NOT use the tool until you have
written Porter-Cable and we have advised you.