Paradyne ENE2020-P - Manual (Page 11)

11
Power Solid
Green ENE2020 is operational If the Power LED is not
illuminated, it is unlikely that
the ENE2020 is receiving
power and therefore none of
the LEDs will be illuminated.
10/100
Ethernet
Connection
100 Solid
Green 100 Mbps Ethernet
connection is
established If the Ethernet 100 LED is
illuminated, the Ethernet Lnk
LED will also be illuminated.
No
Illumination No 100 Mbps Ethernet
connection If the Ethernet 100 LED
remains unlit but the Ethernet
Lnk LED is illuminated then a
connection has been
established at 10 Mbps rather
than 100 Mbps.
10/100
Ethernet
Connection
Act Pulsing*
Amber Standard operation Traffic is flowing without any
problems.
Solid
Amber Heavy traffic
No
Illumination No activity Either there is no Ethernet link
or a link exists but there is no
activity.
10/100
Ethernet
Connection
Lnk Solid
Green Ethernet connection is
established If the Ethernet Lnk LED is
illuminated but not the
Ethernet 100 LED then a 10
Mbps connection has been
established. If the Ethernet
100 LED is also illuminated,
then a 100 Mbps connection
has been established.
No
Illumination No Ethernet connection The Ethernet 100 and Act
LEDs will remain unlit by
default.
* A pulsing LED blinks steadily at a rate of once per second. A flashing LED blinks
at a more rapid, less constant rate.
Table 6. LEDs (2 of 2)
LED State Indication Additional Information