Philips C922 - Manual (Page 31)

29
Accessories
Attaching/
using the
Belt Clip
Install the belt clip on the back side of the handset.
Note: The adapter ring will be fixed permanently to the hand-
set; it cannot be removed again.
Attaching the Adapter:
• Release the round cap by pressing and turning it clockwise
(1) with your thumb and then remove it (2).
• Insert the adapter ring with the fasteners in the opening (3)
and then turn it a quarter-circle counter-clockwise until it
snaps into place (4).
Attaching the Belt Clip
• Press the upper ends of the belt clip together, as illustrated
(5), slide it onto the belt and release the clip ends.
Attaching the Handset to the Clip
• Use the adapter ring to fasten the handset into the belt clip
until it snaps into place (6).
Removing the Handset from the Belt Clip
• Push the release button (7) and pull the handset up out of the
belt clip (8).