Recalling equalizer curves 18, Adjusting equalizer curves 18, Fine-adjusting equalizer curve 18 – Pioneer Super Tuner III D DEH-P3950MP User Manual

Page 18: Audio adjustments, Recalling equalizer curves, Adjusting equalizer curves, Fine-adjusting equalizer curve

Advertising
background image

Black plate (18,1)

Recalling equalizer curves

There are six stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves:

Display

Equalizer curve

POWERFUL

Powerful

NATURAL

Natural

VOCAL

Vocal

CUSTOM

Custom

EQ FLAT

Flat

SPR-BASS

Super bass

! CUSTOM is an adjusted equalizer curve

that you create. If you make adjustments to
an equalizer curve, the equalizer curve set-
ting will be memorized in

CUSTOM.

! When EQ FLAT is selected no supplement

or correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
EQ FLAT and a set equalizer curve.

% Press EQ to select the equalizer.
Press

EQ repeatedly to switch between the fol-

lowing equalizers:
POWERFUL

—NATURAL—VOCAL—CUSTOM

—EQ FLAT—SPR-BASS

Adjusting equalizer curves

You can adjust the currently selected equalizer
curve setting as desired. Adjusted equalizer
curve settings are memorized in

CUSTOM.

1

Press AUDIO to select EQ.

2

Press c or d to select the equalizer

band to adjust.
EQ-L (low)

—EQ-M (mid)—EQ-H (high)

3

Press a or b to adjust the level of the

equalizer band.
+6 to

–6 is displayed as the level is increased

or decreased.

# You can then select another band and adjust
the level.

Note

If you make adjustments,

CUSTOM curve is up-

dated.

Fine-adjusting equalizer curve

You can adjust the center frequency and the Q
factor (curve characteristics) of each currently
selected curve band (

EQ-L/EQ-M/EQ-H).

Level (dB)

Center frequency

Q=2N

Q=2W

Frequency (Hz)

1

Press AUDIO and hold until frequency

and the Q factor (e.g., F- 80:Q1W) appears
in the display.

2

Press AUDIO to select the band for ad-

justment from among low, mid and high.
Press

AUDIO repeatedly to switch between

the following functions:
Low

—Mid—High

3

Press c or d to select the desired fre-

quency.
Low:

40

—80—100—160 (Hz)

Mid:

200

—500—1k—2k (Hz)

High:

3k

—8k—10k—12k (Hz)

4

Press a or b to select the desired Q fac-

tor.
2N

—1N—1W—2W

Note

If you make adjustments,

CUSTOM curve is up-

dated.

<YRD5079-A/U>18

Audio Adjustments

En

18

Section

06

Advertising