Panasonic DVD-S43 - Manual (Page 16)

16
R
Q
TC
011
5
Changing the player settings
≥ Underlined items are the factory preset.
≥ The QUICK SETUP enables successive settings of the items in the shaded area.
∫ “DISC” menu ∫ “VIDEO” menu
1 2 3 4 5
Shows setup menu. Select the menu. Select the item. Make the settings. Press to exit.
SETUP
ENTER
Select
Register
Select
Register
ENTER
1 2 3
4 5 6
7 8 9
0 10
Select
Register
ENTER
SETUP
SETTING STATE Display the current setting of the items below
AUDIO
Choose the audio
language. ENGLISH FRENCH SPANISH ORIGINAL §1
OTHER---- §2
SUBTITLE
Choose the subtitle
language. AUTO §3 ENGLISH FRENCH SPANISH
OTHER---- §2
MENUS
Choose the language
for disc menus. ENGLISH FRENCH SPANISH OTHER---- §2
RATINGS
Set a ratings level to
limit DVD-Video play. Setting ratings (When level 8 is selected)
0 LOCK ALL: To prevent play of discs without ratings levels.
1 to 7:
To prohibit play of DVD-Video with
corresponding ratings recorded on them.
8 NO LIMIT: To play all discs.
When setting a ratings level, a password screen is shown.
Follow the on-screen instructions.
Do not forget your password.
A message screen will be shown if a DVD-Video exceeding
the ratings level is inserted in the unit. Follow the on-screen
instructions.
PASSWORD
Change the
password for
“RATINGS”
(
➜ above).
1 Select “CHANGE” and press [ENTER].
2 Enter the current password with the numbered buttons,
then press [ENTER].
3 Enter the new password with the numbered buttons, then
press [ENTER].
4 When “VERIFY” is displayed, please verify the password
and input it again.
SETTING STATE Display the current setting of the items below
TV ASPECT
Choose the setting to suit your
television and preference. 4:3PAN&SCAN 4:3LETTERBOX
4:3ZOOM 16:9NORMAL
16:9SHRINK 16:9ZOOM
TV TYPE
Select to suit the type of
television. STANDARD CRT
LCD PROJECTION
PLASMA
STILL MODE
Specify the type of picture
shown when paused. AUTO
FIELD:
The picture is not blurred, but picture
quality is lower.
FRAME: Overall quality is high, but the picture
may appear blurred.
BLACK LEVEL
Change the black level of the
picture if you connected a
television through the
COMPONENT VIDEO OUT
terminals. LIGHTER: When connected through VIDEO OUT or
S VIDEO OUT.
DARKER: When connected through COMPONENT
VIDEO OUT.
VIDEO OUT (I/P)
Select “PROGRESSIVE” only if
connecting to a progressive
output compatible television. INTERLACE
PROGRESSIVE
When you select “PROGRESSIVE”, a message
screen will appear.
≥ For progressive output, press [3] and then press
[ENTER].
≥ Press [RETURN] to cancel.
Ch
an
gi
ng
th
e
pl
a
y
er
se
ttings
RQTC_0115_Y.fm Page 16 Wednesday, December 27, 2006 11:46 AM