Palsonic TFTV765 - Manual (Page 17)

STILL Bass+
Bass - Treb-
Treb+
OSD
POSITION
POWER
CH
CH
VOL VOL
+ -
P.M AUTO.ADJ DSP
AV 0
8 7
4 5
1 2 3
6
9
-
/ --
MENU
C.SYS ZOOM CLK SLP
ENTER
1.
2.
3.
Turning On/Off
16
Turning On
Turning Off
Selecting input signal
This TV set can automatically turn off by:
1. When there is no TV signal input for about 15 minutes;
2. Sleep timer;
3. Off timer.
1.
2.
3.
Insert the output plug of the AC power adaptor into the
DC power input of the unit.
Press the power switch on AC power adaptor and the red
indicator lights up, the TV/Monitor is in STANDBY mode.
Press the POWER button on the unit's control panel or
the button on the remote control to turn on.
1.
2.
If you want to turn off the power completely, press the
power switch on the AC adaptor.
If you want to turn off temporarily, press the POWER
button on the unit's control panel or the button on the
remote control, the set goes to STANDBY and the
indicator turns to red.
Press the AV button on the remote control or SOURCE
button on the set's panel to select input mode. You can
select TV, AV, S-Video, YCbCr, YPbPr or PC.
If you want to go to TV mode, press AV button repeatedly
to select TV mode.
Press DSP button, the screen display current mode.
Press ENTER to cancel OSD.
Notes: