Presto Kitchen Utensil - Manual (Page 2)

2
Removable
Baking Pan
Heat Element Selector Switch
(LOWER–DUAL–UPPER)
Timer
Upper Heating
Element
Fig. A
Lower Heating
Element
Drive Shaft
“Curl”
“Curl”
Lower Element
Tray
Cooking
Chart
Unit Assembled
Baking Pan
Pan Hub
“Curl”
Fig. B
Drive
Shaft
Element Tray
“Curl”
Important Cord and plug InformatIon
A short power supply cord is provided to reduce the risk resulting from becoming entangled in or tripping over a longer
cord. DO NOT USE WITH AN EXTENSION CORD.
As a safety feature, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to defeat this safety feature.
getting acquainted
your Pizzazz  pizza oven will cook 7-
to 12-inch pizzas fast and easy without
preheating. Use it to make frozen, take-
and-bake, deli, or homemade pizza. The
selectable heating elements (LoWeR–
DUAL–UPPeR) let you make pizza the
way you like best. Begin by using the
recommended settings in the cooking
chart on page 4. For your convenience,
the chart is also on the back of the pizza
oven. At the end of the recommended
cooking time if you want your toppings
more done, select UPPeR. If you want
a crispier crust, select LoWeR. Then
reset the timer by turning it beyond the
“4” minute mark and then back to 1 or 2
minutes and cook until pizza is done to
your satisfaction. To avoid overcooking,
do not leave unit unattended.
Whenever the unit is plugged in and
the baking pan is correctly positioned,
the motor will turn on and the pan will
rotate. once the timer is set, the heating
elements will turn on. When the time
has expired, the timer will ring and the
heating elements will shut off. The pan
will continue to rotate until either it is
removed or the unit is unplugged.
How to use
Before using for the first time, become familiar with the Pizzazz  pizza
oven (Fig. A). Wash the baking pan in warm, soapy water; rinse and dry
thoroughly.
1. Set pizza oven on a flat, dry countertop away from countertop edge.
2. Locate the two “curls” on the lower element tray (see Fig. A). Position
the baking pan over the lower heating element at an angle so the back
inside rim of the pan rests against the back of the “curls”. Now center
the pan so the pan hub is over the drive shaft (Fig. B). The pan must be
pulled forward against the “curls” for the hub to align with the drive shaft.
Lower the pan so that the drive shaft is seated into the hub. The pan may
rotate slightly while it drops into position, when the hub and drive shaft
engage.