Porter-Cable H650IS-W - Manual (Page 15)

15- ENG D28453
CONNECTING PROCEDURE FOR RAISING OR SUSPENDING
GENERATORS
Failure to properly connect lifting cables, chains, or straps can
cause property damage, serious injury or death, and void the
manufacturer's warranty.
Always use cables, chains, or straps rated at 2000 lbs. working
load or more to raise or suspend generator.
Never operate generator while
suspended. This could cause
property damage, serious injury or death.
1. Route cable, chain, or strap through both
lift rings as shown. ALWAYS use both lift
rings when raising or suspending generator.
NOTE: Make sure the generator is in a level
position before raising or suspending to prevent
damage. Lift Ring
Lift Ring