Front panel – Panasonic AW-PS300 User Manual
Page 6
-4-
t
AC 120V Inlet [AC IN](AC 3P Inlet)
Connect the supplied AC cable.
y
Option Switch Terminal (OPTION SW CONTROL
OUT) (2P Terminal Board)
A relay switch capable of controlling the contact to
short or open from a Control Panel (AW-RP301, AW-
RP305, AW-RP501, or AW-RP505). The terminal board
has a maximum capacity of 120 V, 1 A (AC/DC), and is
valid when it is connected to OPTION SW CONTROL IN
Terminal
u on the pan/tilt head.
u
Option Switch Control Input Terminal (OPTION SW
CONTROL IN) (1P Terminal Board)
Connect it to OP Output Terminal on the pan/tilt head
when controlling OPTION SW CONTROL OUT Terminal
AC IN
LAMP AC OUT
100V 500W
OPTION SW
CONTROL OUT
OPTION SW
CONTROL IN
LAMP
CONTROL
OP
S
C
DC 15V
OUT
−
+
■
FRONT PANEL
y to short or open, using a cable (to be locally pur-
chased) with a nominal cross section of 0.3 mm
2
or
more that meets the UL specifications. The maximum
allowable cable length is 30 meters.
Applicable Wire
Solid wire:
ø1.02 (AWG 18)
Stranded wire:
0.75 mm
2
Usable wire range
Solid wire:
ø0.64 to ø1.02
(AWG 22 to 18)
Stranded wire:
0.3 mm
2
to 0.75 mm
2
(AWG 22 to 20)
Strand diameter: ø0.18 or more
Standard bare end length
10 mm