Panasonic KX-TG1837AL - Manual (Page 40)

Useful Information
40
Wall-mounting
Note:
L
Be sure to choose a location close enough
to connect the telephone line cord and AC
adaptor securely.
Base unit
1
Tuck the telephone line cord inside the
wall-mounting adaptor (
A). Connect the
telephone line cord ( B).
2 Insert the hooks on the wall-mounting
adaptor into the holes (
1) and (2) on
the base unit.
3 Adjust the adaptor to hold the base unit,
then push it in the direction of the arrow
until it clicks into place.
4 Drive the screws into the wall. Make sure
to use the template for correct
positioning. Mount the unit by inserting
the screws into the round openings on
the adaptor, then sliding the unit down to
secure it.
Connect the AC adaptor to power outlet
(page 11) and the telephone line cord to
the telephone line jack.
B
A
1 2
1
2
Screws
80 mm
To telephone
network
(220–240 V,
50 Hz)
80 mm
TG1831-1837AL(e).book Page 40 Friday, February 3, 2006 2:24 PM