Planet Technology WPG-110 - Manual (Page 30)

WPG-110 User Manual
<Apply>: Confirmation and action.
*** Another way to restore Factory Default Settings:
1. Power off WPG-110.
2. On the rear panel, press [Reset] button and Hold.
3. Turn on WPG-110 box.
4. Wait for over 10 seconds and relief [Reset] button.
5. It will take effect to restore factory default settings.
4.10 Firmware Upgrade
1. Firstly, you have to get latest firmware image file from your vendor.
2. Click <Browse> to specify file name you want to upgrade.
3. Click <Upgrade> to start.
4. A warning message shown and count down counter on the screen.
5. After a few minutes, a complete message shown on the screen.
6. Restart WPG-110 to take effect.
- - 30