Python 1401 - Manual (Page 31)

23 © 2009 Directed Electronics. All rights reserved.
➢
Pit Stop mode
The Pit Stop mode feature allows the vehicle to remain running after the key
has been removed from the ignition. This feature is useful for occasions when
you want to exit and lock the vehicle for short periods of time, but would like
to leave the motor running and the climate controls on.
To perform Pit Stop mode:
Before turning Off the engine, press and release the 1. A U X button on the
transmitter.
The parking lights flash one time to confirm that Pit Stop mode has been
initiated, then wait a few seconds.
Turn the ignition key to the Off position (The engine remains running). 2.
Exit the vehicle and lock the system with the remote. 3.
The engine runs until the pre-programmed time elapses or a shut-down
input is received.
Note: To use Pit Stop mode with a manual transmission, open the door when
going into MTS mode. The parking lights flash five-times to confirm entry into
Pit Stop mode. After you exit the vehicle you can lock the system with the
remote and the car remains running. If the vehicle shuts down when locking,
then the unit did not enter the Pit Stop mode.