Pioneer DEH-P7750MP - Manual (Page 33)

Using CD TEXT functions
You can use these functions only with a CD
TEXT compatible multi-CD player.
Some discs have certain information encoded
on the disc during manufacture. These discs
may contain such information as the CD title,
track title, artists name and playback time
and are called CD TEXT discs. Only these spe-
cially encoded CD TEXT discs support the
functions listed below.
Displaying titles on CD TEXT discs
% Press DISPLAY.
Press DISPLAY repeatedly to switch between
the following settings:
Play time : disc title : disc artist name
 : track title : track artist name
# If specific information has not been recorded
on a CD TEXT disc, No XXXX will be displayed
(e.g., No T-Artist Name).
Scrolling titles in the display
This unit can display the first 14 letters of disc
title, disc artist name, track title and track ar-
tist name. When the text information is longer
than 14 letters, you can scroll the display as
follows.
% Press DISPLAY and hold until the title
begins to scroll through the display.
The titles scroll.
Note
When Ever Scroll is set to ON at the initial setting,
CD text information scrolls continuously in the
display. If you want to display the first 14 charac-
ters of text information temporarily and scroll
from the beginning, press and hold DISPLAY.
About Ever Scroll, refer to Switching the Ever
Scroll on page 51.
Selecting tracks from the track
title list
Track title list lets you see the list of track titles
on a CD TEXT disc and select one of them to
play back.
1 Press LIST to switch to the disc title list
mode during the playback display.
# If you want to display the track title list of the
currently playing disc, push Multi-Control right.
2 Use Multi-Control to select the desired
disc title of CD TEXT.
Turn to change the disc title; press to play.
# You can also change the disc title by pushing
Multi-Control up or down.
# No disc is displayed next to the disc number
when there is no disc in the magazine.
3 Push Multi-Control right to switch to
the track title list.
# Push Multi-Control left to return to the disc
title list.
4 Use Multi-Control to select the desired
track title.
Turn to change the track title; press to play.
# You can also change the track title by pushing
Multi-Control up or down.
Using compression and
bass emphasis
You can use these functions only with a multi-
CD player that supports them.
Multi-CD Player
En
33
English
Section
07