Powermate P-WFT-16022 - Manual (Page 9)

Questions? Call Toll Free at 1-800-737-2112 Copyright © 2009 MAT Engine Technologies, LLC
• Gasoline is extremely flammable and vapors can
explode if ignited. Handle with care.
Use fresh, clean, regular-unleaded gasoline with a minimum
of 88 Octane.
Do NOT use leaded gasoline, gasohol, methanol, or diesel
fuel. Do NOT mix oil with gasoline. Do NOT allow gasoline
to become contaminated with dust, water, or debris.
Using incorrect fuel type or contaminated fuel will cause
serious engine damage.
NOTE: Fuel tank capacity is approximately 0.95 qt (0.9L)
HOW TO FILL ENGINE WITH FUEL
• Turn engine off and let engine cool for several minutes
before removing the fuel cap or adding fuel.
• Never fill fuel tank indoors.
• Do not smoke while adding fuel.
1. Clean surface around fuel tank cap to prevent
contaminations. Refer to Figure 5 for location of fuel cap.
2. Loosen fuel cap slowly to remove.
3. Pour fuel into the tank. Use care to avoid spillage.
Do NOT OVERFILL fuel. Allow space for the fuel to expand
due to heat from engine and/or sun.
4. Before replacing the fuel cap, inspect and clean the fuel
cap seal.
5. Replace the fuel cap and securely hand-tighten. On
model S-WFT-16022 only, you will feel and hear a click
when the cap is secure.
6. Clean up any spilled fuel.
WARNING
Figure 5
Oil Fill Cap/Dipstick
Fuel Tank Cap
WARNING
Fuel
B
WARNING
CAUTION
Engine Preparation
(Continued)
• Save all instructions
8