Polycom KIRK 14117800 - Manual (Page 104)

104 Configuring KIRK Wireless Server 600v3
14117800, Ed.2.6
5 Click Reset (under Administration menu) to save your configuration.
The Sync Master is now configured.
7.6.3 Configuring the Alternative Master KIRK Wireless Server 600v3
This section describes how to configure an alternative (Standby) Master KWS600v3 in a
multi-cell solution. In case the Master KWS600v3 stops working, the alternative
(Standby) Master KWS600v3 will take over connection to the call handler.
Note:
Configuring an alternative Master KWS600v3 is optional - and only recommended
- if you have a very large multi-cell installation (number of KWS600v3 and/or handsets).
Note:
The alternative Master KWS600v3 can also be used as the alternative LDAP Server.
If a dedicated wireless server is used as a Master KWS600v3 only, the alternative Master
KWS600v3 must also be dedicated. For more information about the alternative LDAP
Server, refer to “” on page 120 .
Figure 42
KWS600v3 Multi-cell installation with Alternative (Standby) Master
For information on accessing the web based Administration Page, refer to “Accessing the
Web Based Administration Page” on page 79 .
This section contains information about:
• “Entering a System User Name and Password (Standby)” on page 105
• “Assigning a Specific IP Address (Standby)” on page 105
• “Configuring Ethernet Link (Standby)” on page 107
• “Configuring DECT Master (Standby)” on page 107
• “Configuring DECT Radio (Standby)” on page 108