Polycom KIRK 14117800 - Manual (Page 163)

KIRK Handset Management 163
KIRK Wireless Server 600v3 Installation and Configuration Guide
Figure 94
Adm. Page: Edit User dialog box
3
Change settings, and then click Apply.
4 Click OK.
9.6 Adjusting the KIRK Handset
Note:
This section only contains information about adjusting the 3040/4020/4040/4080
Handsets.
This section provides information about:
• “Content of the KIRK Programming Kit Handset” on page 163
• “Set up of the Hardware for KIRK Handset Adjustment” on page 164
• “Adjusting the KIRK Handset with the ServiceTool” on page 164
9.6.1 Content of the KIRK Programming Kit Handset
The Programming Kit Handset (Part no. 02319509) for 3040 Handset consists of:
• serial cable
• programming stand
• 220V power supply
The Programming Kit Handset (Part no. 02319542) for 40XX Handset (see illustration
below) consists of:
• serial cable
• splitter