Polycom KIRK 14117800 - Manual (Page 167)

System Management 167
KIRK Wireless Server 600v3 Installation and Configuration Guide
• Time; time information - if a time server is valid
• Uptime; information about uptime since last restart
• Firmware (only displayed if radio is active)
• System ARI; ARI code of the system (only displayed if radio is active)
• Frequency
10.1.3 Reading DECT Statistics
In the DECT menu, under Administration, it is possible to read information about calls,
users, radio calls, and handovers in the system. You get an over all overview of how the
system is running.
Note:
The pages in the DECT menu varies, depending on the installation (single-cell/
multi-cell) and role of the KWS600v3 (Master/Secondary/LDAP Server).
This section provides information about:
• “Statistics” on page 167
• “Users” on page 168
• “Unknown” on page 168
• “Radios” on page 169
• “” on page 169
• “” on page 170
• “Handovers” on page 171
10.1.3.1 Statistics
This page is useful to get statistic information from the KWS600v3 about all the incoming
and outgoing calls on the system and handover information.
1
Under the Administration menu, click DECT.
Figure 98 Adm. Page: Administration/DECT/Statistics page