Philips DVP3345V/F7 - Manual (Page 19)

Clock (VCR) 19
- M E N U -
B TIMER PROGRAMMING
SATELLITE LINK
AUTO REPEAT
[OFF]
CLOCK SET
LANGUAGE SELECT
English
• If the clock has never been set,
the CLOCK SET Menu may
appear when you press SETUP.
If so, follow the instructions
from step 3 above.
• Press DISPLAY repeatedly to
show the time on the TV
screen.
• Power failures of more than 30
seconds can erase the Clock
Setting.
• To reset the clock, follow steps
1-2. Select the information you
want to change using s or B.
When the information is
flashing, use K or L to enter
the correct information. Press
CLEAR to set the clock.
Helpful Hints
2-9
DVD VCR SETUP
INPUT MENU
REC SPEED MODE
ANGLE SEARCH REPEAT
DISPLAY SUBTITLE ZOOM
TIMER SET
REPEAT
A-B
AUDIO
BACK PAUSE STOP
PLAY
OK
FFW REW
CLEAR TITLE
DISC
TRACKING
OPEN/CLOSE
1 2
6 5 4
7 8 9
0 +10
3
1
MONTH DAY YEAR
0 3 / – – – – – –
HOUR MINUTE
AM/PM
– – : – – – –
CLOCK SET
Follow these steps to set the VCR clock. Make sure:
1 Press VCR, then press SETUP so MENU appears. If the
clock has never been set, the CLOCK SET Menu may
appear when you press SETUP. If so, follow the instructions
from step 3 on this page.
2 Press K or L to select CLOCK SET. Then, press B.
3 While the MONTH space is flashing, press K or L
until the month appears. Then, press B.
4 While the DAY space is flashing, press K or L until
the day appears. Then, press B.
5 While the YEAR space is flashing, press K or L
until the year appears. Then, press B. The day of
the week will appear automatically.
6 While the HOUR space is flashing, press K or L
until the hour appears. Then, press B.
7 While the MINUTE space is flashing, press K or L
until the minute appears. Then, press B.
8 While the AM or PM space is flashing, press K or L
to point to AM or PM.
Your selection will flash on the screen in the AM/PM space.
9 Press CLEAR or B to start the clock.
9
E8E21UD_EN1.qxd 09.1.23 2:42 PM Page 19