Pioneer DV-600AV-S - Manual (Page 45)

Initial Settings menu 08
45
En
English
Speakers settings
(DV-600AV only)
Audio Output Mode
(DV-600AV only)
• Default setting: 2 Channel
If you connected this player to your amplifier
using the 5.1 channel analog outputs (front,
surround, center and subwoofer outs), set this
to
5.1 Channel ; if you connected only the
stereo outs, set to 2 Channel .
Note
• Even if you set Audio Output Mode to 5.1
Channel , you’ll only get sound from all
speakers when playing a 5.1 channel
multi-channel disc.
• When set to 5.1 Channel , only the front
left/right channels are output from the
AUDIO OUT (2ch) jacks. Change to 2
Channel if you want to listen to downmixed
stereo audio (for example, because you are
listening through the TV’s built-in
speakers).
• When set to 5.1 Channel there is no digital
output when playing DVD-Audio.
• If you set to 2 Channel , Dolby Digital, DTS
and MPEG audio is mixed down to two
channels so you still hear all the audio
recorded on the disc. With DTS encoded
audio, you can choose how the signal is
downmixed to PCM audio. See
DTS
Downmix on page 43 to change the
downmix setting.
• Some DVD-Audio discs don’t allow down-
mixing of audio. These discs always output
multi-channel audio regardless of the
setting made here.
Setting Option What it means
Audio Output
Mode 2 Channel The player outputs analog audio in stereo only. See also
Audio Output Mode below.
5.1 Channel The player outputs 5.1 channel analog audio. See also Audio
Output Mode below.
Speaker
Installation – Specify the number and size of speakers in your system. See
also
Speaker Installation on page 50.
Speaker Distance – Specify the distance of your speakers from your listening
position.
Speaker Distance on page 49.
Digital Audio Out
Video Output
Language
Display
Options
Speakers
Audio Output Mode
Speaker Distance
Speaker Installation
2 Channel
5.1 Channel
Initial Settings
DV-600AV screen
DV600AV_UK_EN.book 45 ページ ２００７年３月１５日 木曜日 午後５時２０分