Panasonic CQ-VW100U - Manual (Page 5)

4
5 CQ-VW100U
English
Notes on Use
Components
7. Installation Hardware (screws,
cords, etc.)
(
a Installation Instructions)
6. Customer Care Plan
Qty.: 1
5. Product Registration Card
Qty.: 1
4. Installation Instructions
<YFM294C128CA>
Qty.: 1
XXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXX XXXXXXXXXXXXXX XXXXXXXXXXXXXXXX OO-OOOOO
3. System Upgrade Guidebook
<YFM264C066CA>
Qty.: 1
XXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXX XXXXXXXXXXXXXX XXXXXXXXXXXXXXXX OO-OOOOO
2. Operating Instructions
<YFM264C065CA>
Qty.: 1
XXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXX XXXXXXXXXXXXXX XXXXXXXXXXXXXXXX OO-OOOOO
1. Main Unit
(LCD monitor/DVD player)
Qty.: 1
MUTE VOL SRC / PWR DIMMER SETUP TUNE/TRCK TILT
CQ-VW100U
Note:
¡The number in parenthesis underneath each accessory
part name is the part number for maintenance and
service.
¡Accessories and their parts numbers are subject to
modification without prior notice due to improvements.
Liquid Crystal Panel
¡ Do not cause impact to the liquid crystal panel.
¡ Usage temperature range: 0 °C to 40 °C
{32 °F to 104 °F}
When the temperature is very cold or very hot, the
image may not appear clearly or may move slowly.
Also, movement of the image may seem to be out of
synchronization or the image quality may decline in
such environments. Note that this is not a malfunction
or problem.
¡ In order to protect the liquid crystal panel, keep it out
of direct sunlight while the unit is not in use.
¡ Sudden changes in the temperature inside the car such
as those which occur immediately after the car’s air
conditioner or heater has been turned on may cause
the inside of the liquid crystal panel to cloud over due
to water vapor or it may cause condensation (droplets
of water) to form and, as a result, the panel may not
work properly. Do not use the unit while these symp-
toms are in evidence but leave the unit standing for
about and hour, and then resume or start use.