Panasonic KX-PW603DL - Manual (Page 4)

4 4
Installations and connections
Installing the ink film
1
Press here and open the control panel.
3
If the ink film is slack, tighten it by
winding this gear (orange).
4
Close the control panel until it locks.
2
Insert the ink film.
Insert the orange core into the right
slot of the main unit.
Insert the orange
gear into the left slot
of the main unit.
l When the unit runs out of ink film, the following message will be displayed.
Install a new ink film.
As of February 2005. Tax included.
Replacement ink film:
KX-FAN200 (30 m) 1,208