Pure Evoke-1XT - Manual (Page 4)

4
Setting an alarm
EVOKE-1 XT has a daily alarm which switches EVOKE-1 XT on (if in standby mode) and tunes to the station you have chosen
or sounds a tone. To set or change an alarm:
1. Press the Menu button to see the current alarm settings.
2. Push the Tune knob if you want to change the alarm settings.
3. Turn the Tune knob to scroll through the following settings and push to change them. The current setting is shown on
the top line of the screen.
Set alarm
Set the alarm on or off.
Set time Turn the Tune knob to set the hours, push the Tune knob, turn again and push to set the minutes.
Set mode Choose between a Radio (set to current station) or Tone alarm. If you set a radio alarm the
volume will be whatever the volume control is set at when the alarm goes off.
When finished, press the menu button or wait to exit. If you switch your radio into standby you will see a bell symbol
on the screen next to the clock showing that an alarm is set.
Note If you set a radio alarm and the station is not available when it is due to go off, a tone alarm will sound instead.
When the alarm goes off, EVOKE-1 XT will beep (gradually increasing in volume to a set level) or tune to the station you
have chosen. You see the clock and flashing alarm icon on screen. You cancel the alarm as follows:
Radio alarm Press any button to cancel the alarm and perform the button’s normal function.
Tone alarm
Push the Tune knob or Standby to cancel the alarm.
All alarms will automatically stop after 60 minutes if not cancelled and your EVOKE-1 XT will go into standby.
Setting a timer
You can set a timer which will sound an alarm after a period — ideal for use in the kitchen.
1. Press the Timer button.
2. Turn the Tune knob to change the hours, push and turn again to change the minutes and push again to confirm.
The timer is now set and the alarm will sound after the period you have set. To view the time remaining press the Timer
button again. To cancel or reset the timer to zero before it goes off, press and hold down the Timer button for three
seconds. When the timer alarm goes off you can cancel the alarm by pushing the Tune or Standby button.