Professional blending techniques, Wwarning – Proctor-Silex HBH450 User Manual

Page 6

Advertising
background image

Operation

6

Professional Blending Techniques

Filling the container

When filling the container with ingredients, follow
these recommendations:
• Use sufficient amount of liquid to ensure that the

mixture is fluid and free-running at all times. Pour
the liquid into the container FIRST.

• Cut solid ingredients into pieces that are no

bigger than a 1

″ (2.5 cm) cube.

• Add the ingredients to container in batches. Do not

blend maximum volume all at once.

• Do NOT overfill the container with product. This

may prevent the blender from processing the
product properly. Process dense foods or thick
mixtures in small batches, and remember that the
volume of the product normally increases during
processing.

• Do not exceed one quart of content when

blending hot product.

• Always place the cover and filler cap on the

container when blending. For blending hot
liquids, remove filler cap from container cover
before blending.

Blending techniques

Icy drinks – Do not use blender to crush large ice
cubes. The blender is not designed for this. Small
ice cubes or crushed ice is recommended. Pour in
liquid, then add ice. Cover. Set speed at HIGH and
process until desired consistency is reached.
Chunks of frozen fruit can be added to milk or
fruit juice to produce a sherbet or slush.

Blending hot mixtures

IMPORTANT: To minimize the possibility of
scalding, the following precautions MUST be
observed:
• Do not exceed 1 quart of content when blending

hot product. Remember that the volume of the
product normally increases during processing.

• Always place the cover on the container and

remove the filler cap from container cover when
blending hot liquids to prevent the build up of
pressure.

• Never stand with your face directly over the

container when operating the blender where
steam may be released.

• Begin on LOW speed and then select a speed

that produces a column of air in the center of
the container.

Filler Cap

Use the filler cap to add liquids to the container
while the unit is running.

w

WARNING

Burn Hazard

Always use caution when blending
hot contents.

Failure to follow these instructions
can result in burns.

Advertising