Panasonic DMC-3D1 - Manual (Page 13)

13
(ENG) VQT3U37
How to Use the Touch Panel
This touch panel is a type that detects pressure.
Note
• If you use a commercially available liquid
crystal protection sheet, please follow the
instructions that accompany the sheet. (Some
liquid crystal protection sheets may impair
visibility or operability.)
• Apply a little extra pressure when touching if
you have a commercially available protection
sheet affixed or if you feel it is not responding
well.
• Touch panel will not operate properly when the hand holding this unit is pressing
on the touch panel.
• Do not press using anything with a sharp tip or anything hard, except for the
supplied stylus pen.
• Do not operate with your fingernails.
• Do not scratch or press the LCD monitor too hard.
• Wipe the LCD monitor with dry soft cloth when it gets dirty with finger prints and
others.
Touch the screen
To touch and release the touch panel. Drag
A movement without releasing the
touch panel.
Use this to perform tasks such as
selecting icons or images displayed on
the touch panel.
• It may not operate properly when
multiple icons are touched
simultaneously, so try to touch the
center of the icon.
This is used when performing tasks
such as moving to the next image by
dragging horizontally, or changing the
range of the displayed image.
This can also be used to perform tasks
such as switching the screen by
operating the slide bar.
DMC-3D1P-VQT3U37_eng.book 13 ページ ２０１１年１０月２４日 月曜日 午後４時３８分