PYLE Audio PRJSD188 - Manual (Page 7)

warning
Please check the following picture to show the trapezoid adjustment
Incorrect installation,
the images right-left small.
Screen
Screen
symmetry
axis
Projector
Incorrect installation,
the images left-right small. Installed correctly,
the image is rectangular.
The data maybe have 3% error,due to the image size according
to the distance between projector and screen
if the distance is
less 2m or over 5m,the image would not be clear.
Projector Installation
Standard setting (front projection )
Please refer to the following instruction ,adjust your picture size and
distance, the projector must be put on a strong flat desk or suspended
on the ceiling by mounts
Maintenance
Replace the projector lamp
our projector lamp have 6months warranty ,But in different use environment
after 6000hours ,the lamp brightness will reduce and the image will become dark.
Therefore ,please replace the lamp according to the following steps:
2pcs screw
First inverse projector on the table and remove the 2screws as picture
22
4pcs screws
Put the projector on the table,remove the 4pcs screws and the cover
4:3 Image ratio
M M M M
84
Inch
Inch
Inch
Inch