Panasonic SC-HT670 - Manual (Page 7)

7
Simple setup
RQT7534
7 Connecting a television with COMPONENT VIDEO IN
terminals
COMPONENT VIDEO OUT terminals
These terminals can be used for either interlace or progressive
output and provide a purer picture than the S-VIDEO OUT
terminal. Connection using these terminals outputs the color
difference signals (P
B
/P
R
) and luminance signal (Y) separately in
order to achieve high fidelity in reproducing colors.
¡ The description of the component video input terminals
depends on the television or monitor (e.g. Y/P
B /P R , Y/B-Y/R-Y,
Y/C
B
/C
R
). Connect to terminals of the same color.
¡ After making this connection, change the black level for a better
picture (
A page 28, Video – Black Level Control).
To enjoy progressive video
¡ Connect to the component video (480P) input terminals on a
television compatible with this unit’s copy guard system.
(Video will not be displayed correctly if connected to an
incompatible television.)
¡ Press [PROGRESSIVE] on the main unit so “PROG.” appears
on the display (
A page 12).
¡ All televisions manufactured by Panasonic and that have
480P input connectors are compatible. Consult the
manufacturer if you have another brand of television.
7 Connecting a television with a VIDEO IN terminal
Connect directly to your television.
Do not connect the unit through a video cassette recorder, because
the picture may not be played correctly due to the copy guard.
7 Connecting a television with an S-VIDEO IN terminal
S-VIDEO OUT terminal
The S-VIDEO OUT terminal achieves a more vivid picture than the
VIDEO OUT terminal by separating the chrominance (C) and
luminance (Y) signals. (Actual results depend on the television.)
P B
IN
S-VIDEO
IN
VIDEO
COMPONENT
VIDEO IN
Y
P B
P R
Television STEP
3
Antennas and AC power supply cord
STEP
4
Conserving power
The unit consumes power (approx. 0.5 W) even when it is turned off
with [
f ]. To save power when the unit will not be used for a long
time, unplug it from the household AC outlet.
You will need to reset some memory items after plugging in the
unit.
Video cable (included)
Video cables (not included)
S-Video cable (not included)
FM indoor antenna
Adhesive tape
Fix the other end of the
antenna where reception
is best.
AM loop antenna
Stand the antenna up on its
base. Place the antenna
where the reception is best.
Keep loose antenna cord
away from other wires and
cords.
AC power supply cord
CLICK !
¡ Connect the AC power supply cord after all other connections are complete.
¡ Optional antenna connections ( A A A A A page 30).
Video cable
AM loop
antenna
FM indoor
antenna
AC power
supply cord
Television
(not included)
RQT7534-3P PC(06-9) 12/3/04, 3:34 pm 7