Philips CFI-08100 User Manual

Philips lighting company, Product

Advertising
background image




200 Franklin Square Drive
P.O. Box 6800
Somerset, NJ 08875-6800




A Division of

Lamp Material Data Sheet (LMDS)

Product:

Philips Compact Fluorescent Lamps CFL-i – All Types

ALTO and non-ALTO: SLS, EL/, Genie, and FC Types (All base types)

Philips Lighting Company

LMDS #: CFI – 08100A

Date: 08/10/2009

Page 1 of 2

Section 1. Manufacturer and Contact Information

Philips Lighting Company

Division of Philips Electronics North America Corporation

200 Franklin Square Drive

P.O. Box 6800

Somerset, NJ 08875-6800

24 HR Emergency Phone Number:

(800) 424-9300 CHEMTREC

Other Information Calls:

(800) 555-0050 Philips Lighting Technical Information

Section 2. Hazardous Ingredients/Identity Information

These lamps contain the following materials: Exposure Limits in Air

Material

(CAS #)

OSHA PEL

ACGIH TLV

PERCENTAGE

mg/m

3

mg/m

3

by weight

Phosphor

Powder

(as Nuisance Dust)

15

10

<2.5%

Yttrium Oxide (as Yttrium)

(1314-36-9)

1

1

<0.5%

Barium Carbonate

(0513-77-9)

0.5

0.5

<0.1%

Manganese Carbonate

(598-62-9)

5

5

<0.1%

Tin

(7440-31-5)

0.1

0.1

<0.1%

Indium

(7740-74-6)

0.1

<0.07%

Bismuth

(7440-69-9)

<0.005%

Mercury

(7439-97-6)

0.1

0.025

~0.025%

The Phosphor Powder materials are ceramic phosphors. The ceramics are Barium Aluminate and Yttrium Oxide. The
PEL and TLV are given where available for the base materials. There is no data for the ceramics as mixtures.

Section 3. Physical Properties

Not applicable to an intact lamp. These items are light bulbs in various shapes, configurations, and designs. All contain a
small fluorescent tube (either twisted or bent to shape), a plastic housing (containing an electronic circuit to start the
lamp), and a threaded base for use in standard incandescent lamp sockets (or a pin base for use in a GU24 socket).
Some lamps utilize a glass, or plastic, outer envelop to enclose the fluorescent tube.

Section 4. Fire and Explosion Hazards

Not applicable to an intact lamp. If subjected to extreme heat, the plastic and glass components of the lamp may crack
or melt and the lamp may emit toxic fumes.


Tel: 732.563.3000

Philips Electronics North American Corporation


Advertising
This manual is related to the following products: