Panasonic KX-FHD301 - Manual (Page 35)

35
Sending Faxes
Sending the same document to pre-programmed parties
1 Insert the document FACE DOWN.
● If necessary, press or repeatedly
to select the desired resolution (p. 29).
2 Press .
● You can also use / key. Press
then press or until the
following is displayed, and press .
Display:
● The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each item, calling each
number sequentially.
● After transmission, the stored document will
be erased automatically, and the unit will
automatically print a broadcast sending
report.
<BROADCAST>
SEND:PRESS SET
SET
FACE D
OWN
SET
Display
STOP
BROADCAST
Note:
● If you select the “FINE”, “SUPER FINE” or “PHOTO”
resolution, the number of pages that the unit can
transmit will decrease.
● If the document exceeds the memory capacity (p. 73),
sending will be canceled.
● If one of the items is busy or does not answer, the item
will be skipped. All skipped items will be redialed up to
2 times after all of the other items have been called.
To cancel the broadcast setting
1. Press while the unit displays the following.
Display:
● The display will show the following.
2. Press . SET
SEND CANCELED?
YES:SET/NO:STOP
@ BROADCASTING
STOP
BROADCAST